Perform a reset on your cooler if it is freezing the water or if it is not getting cold enough. To do a reset, drain a few cups of water out of both the hot and cold sides of the water cooler. Then turn the switches in the back of the cooler off. Unplug your water cooler, and leave it unplugged for 24 hours.Click to see full answer. Furthermore, how do I fix my water cooler? Step 1 – Unplug and Clean Always unplug your water cooler dispenser before doing any repair or maintenance on it. Then, remove the water jug from the top and locate the coils on the inside. You will find more than one if you have a dispenser with both hot and cold spouts.Furthermore, how do I make my Primo Water Cooler colder? How to Set the Temperature on a Primo Water Dispenser Move the Primo water dispenser away from the wall, being careful not to tip or spill the water bottle. Locate the flat, brass-colored screw on the back of the water dispenser. Turn the screw slightly clockwise for colder water or counterclockwise for warmer water. Check the temperature of the water. Beside this, why is my refrigerator water not cold? Make sure that the air flow around this tank or coil is not blocked with food items. This could prevent the water from cooling properly. Also, check your refrigerator temperature to make sure that it is cooling properly. A problem with refrigerator temperature could also prevent your dispenser water from being cool.How do you fix an airlock in a water cooler?It is possible that an airlock has occured in the internal pipework in the cooler. To resolve this we recommend simply lifting the bottle of top of the cooler up above the cooler and then replacing it back in position. Then squeeze the bottle gently using a ‘hug’ type grasp.
ncG1vNJzZmivp6x7pLHLnpmroaSesrSu1LOxZ5ufonuotI6hprBllKR6urvUZp2isF2Werit056pZpufpLmmvoytn5qsXZm8pr%2FNrWScp5%2BhfA%3D%3D